Floor Sealer£45.00 – £84.99
Clear Polyurethane Primer and Floor Sealer
Extreme Seal primer sealer
A single pack low viscosity penetrating first coat primer designed to soak into the substrate, providing excellent adhesion of subsequent topcoats.
This product will reduce any risk of delamination due to poor penetration of heavy top coats suitable for use with Floormaster polyurethane floor paint and to be used on bare or painted concrete.
Application
Brush or roller, (after stirring). Brush well into the surface. Since the product dries by evaporation of water it should not be applied under conditions of high humidity or where there is a risk of high condensation during the drying period.
Drying Time
Under normal conditions it is touch dry in approximately 3-4 hours. Overcoating minimum 12 hours, These times will be extended at lower temperatures and also in conditions of high humidity.
Theoretical Covering Capacity
6 sq. m/litre at 50 microns dry film thickness. Please allow for wastage and surface porosity
Cleaning Solvent
Clean tap water. If the paint is dry, White Spirit Thinner should be used.
Storage
Secure lid between uses to prevent paint hardening. 12 months in original unopened container
Surface Preparation
Ensure all surfaces to be sealed are clean, dry and free from oil and grease and there is a couple days of good weather so there is now chance of rain during application.
Batch Information
If items are purchased on separate occasions there may be a slight colour variation as our products are manufactured in different batches.
Container variation
Occasionally when demand is high the manufacturer will run out of stock of the printed containers, this will result in the item being dispatched in white plastic 20ltr containers.
